Grill Burner Comparison: Cross Sections

All stainless steel burners are not produced equal. weber natural gas grills When comparing burner systems, there are a couple of important points to appear for. Most suppliers use stainless steel sheet metal to make their burner systems. The downside of sheet metal burners is that they are prone to a method called burn-through. The manufacturer's warranty covers sheet metal burners against rust-via, but does not cover against burn by means of. To combat burn through, choose makers use CAST stainless steel burners. The warranty on these burners does cover burn-through as well as rust-through, twisting, warping and any other problems.

Compared side by side it is plain to see by our images at Gas Grills Now, that where a sheet metal burner is not as thick as a U.S. quarter, a cast stainless steel burner is a full INCH thick. Along with becoming thicker, note the placement of the burner ports on the side of the burner. On the sheet metal burners, the ports are exposed to grease drippings, and food particles, which can clog the ports and speed up the burn-via procedure. The cast burner is created with a protective ridge, so that drippings can't speak to the weber gas grills reviews ports.

There are many selections supplied to the consumer: Cast stainless steel, Tube stainless steel, Sheet stainless steel, porcelain, cast iron and chrome burners.

* Stainless Steel: Sheet Metal burners are the least costly. They are primarily employed on grills under $800. A tube burner is far better than sheet metal, but is nonetheless quite thin compared to cast. The tube burner is a wonderful place for high finish grill manufactures to cut charges. They are not even as thick as a quarter. As far as I know, all tube burners do not cover burn via.

Cast Stainless Steel is the very best. Look at the burner pictures and you will see that the cast is 1/four inch thick.

Warranty covers burn by way of!

* Cast Iron: Cast-iron conducts heat much better which tends to make it the preferred cooking surface for many cooks. To shield against the natural rusting process, cast-iron cooking grids have a porcelain finish which calls for special upkeep.

* Porcelain: Porcelain enamel is basically a very durable glass which, with coloring oxides and other inorganic materials, is fused to metal at incredibly high temperatures. Most weber grills reviews grids are created of steel rods some are coated with porcelain to make them rust resistant and easier to clean.

* Chrome: Chromium is a silver-gray, lustrous, brittle, tough metal that can be extremely polished. It does Not tarnish in air, but burns when heated, forming the green chromic oxide. It is employed in plating other metals since of its hardness and non-tarnishing properties. In alloys with other metals it contributes hardness, strength, and heat resistance. This is quicker to burn through. It takes about 1 to two years.